Our work
2,500 projects. Here are some of them.
Every photograph on this page is a Sinvesta installation — our panels, our inverters, our cable runs. Nothing here is a stock image.
Rooftop arrays
Residential & commercial installs.
Hillside home, north shore
Roof-hugging array on a steep site, laid out to work around skylights and a split roof line.
Warehouse roof, Klip-Lok mount
Large-format array on trapezoidal metal decking, clamped without a single roof penetration.
Family home, western Sydney
A larger family array sized around ducted air-conditioning and a pool pump.
Tile roof install
Tile-hook mounting done the slow way — lifted, hooked, and re-bedded so the roof still sheds water.
Full northern pitch
Every usable square metre of the north face, laid out in clean unbroken rows.
Low-pitch roof
Low-profile rail system keeping the array tight to a shallow roof line.
Industrial roof, full-length rows
Long, straight runs down a corrugated factory roof, set out clear of the skylights and roof vents.
Parapet roof, metal deck
Rows set back from the parapet on a corrugated metal deck, laid out around the roof penetrations.
Tilt frames + bird-proofing
Tilt frames lift the panels off a low-pitch deck, with mesh clipped around the edge to keep birds out from underneath.
Bird-proofed metal roof
Rail-mounted array on a metal roof, with a mesh guard fitted all the way round so birds can't nest under the panels.
Storage & charging
Batteries and EV chargers in the wild.
SigenStor, three-module stack
Mounted on a weatherboard wall with the isolator, conduit and battery safety signage in place.
High-capacity modular stack
A tall modular bank for a high-consumption household, expandable module by module.
Tesla Wall Connector
Wall Connector on a dedicated circuit with weatherproof isolator above, cable dressed and clipped.
Twin Tesla Powerwall
Two Powerwall units either side of a Fronius inverter, mounted square and plumb with the run kept off the floor.
Sungrow stack, brick wall
Stacked Sungrow storage on a levelled plinth — isolator, conduit and full hazard signage to standard.
Twin SigenStor, garage
Two Sigenergy stacks side by side on a level floor, with the switchboard beside them labelled for the ES and PV circuits.
SigenStor behind bollards
Garage install with a pair of yellow bollards in front, so the car can never nudge the stack.
SigenStor down the side path
A slim outdoor stack tucked tight to the wall along the side of the house, leaving the walkway clear.
SigenStor, side wall
Outdoor-rated SigenStor on the side wall, clear of the gate and the path.
Inverters & switchgear
The part most installers hide around the side.
Straight conduit, level mounting, labelled isolators: the details that make a system last 20 years.
Proof it works
See your system working, live.
Every system we install comes with its own app. Watch solar, battery, home and grid in real time, and see exactly where each day’s energy went.
Tesla app · Powerwall, solar and EV charger in one view · Storm Watch charges ahead of storms
Sigenergy app · live energy flow, battery level and operating mode
One day on a SigenStor system · 45.64 kWh of solar · 93.69% of supply from the sun · 27.45 kWh exported
Your roof next
Want work like this on your place?
Send through your last power bill and we'll come back with a fixed written quote — the right system size, the real output, and the rebate already taken off.
